Water Bottle Sleeve

28 Reviews
$25.00 Weight 0.71 oz / 20.0 g


Lead Time Ships in 1 to 3 Days

Water Bottle Sleeves are a great way to keep your water easily accessible while also counter-balancing your backpack. Designed to fit 1L "Smartwater" bottles and similar, these sleeves will attach to the shoulder straps on just about any backpack.

  • Constructed from 2.92 oz/sqyd Dyneema® Composite Fabric Hybrid and durable 3.5 oz/sqyd mesh.


  • These will fit on almost any backpack. Two elastic straps and two loops with toggles attach the Water Bottle Sleeve securely to your strap's daisy chain.


  • The mesh compartment was specifically designed to carry the most common tall skinny 1L bottles, which measures 2.75" diameter by 11.5" tall including the cap (7 cm x 29 cm). Similar sized bottles will also work.


  • The collar features rigid plastic allowing you to easily remove or replace the water bottle with one hand and no fuss.


  • Elastic at the top of the holder can be wrapped around the neck of the bottle to prevent it from sliding out when bending over.


  • All Zpacks gear has a two year limited warranty against defects in materials or workmanship. Please see our return / warranty policy.

  • Made in the USA.

Size: About 3" diameter x 9" tall (8 cm x 23 cm)

Volume: 64 cubic inches (1.1 liter)

2.92 oz/sqyd Dyneema® Composite Fabric Hybrid


Dyneema® Composite Fabric is composed of high strength Dyneema® fiber laminated inside a polyester membrane. It is inherently waterproof and does not require any coatings or DWR treatment. Dyneema® Composite Fabric has very high tensile strength for its weight and does not stretch.

This hybrid version is made from 1.43 oz/sqyd Dyneema® Composite Fabric on the inside, with an extra layer of protective 50 denier polyester on the outside. The outer layer gives it more strength and abrasion resistance, prevents fraying, and gives it a nice solid color. 
   
Tensile Strength:
 245 lb/in (2150 N/5cm)

Puncture Strength: 
7.3 lb (32 N)

Water Resistance:
 >20,000 mmH₂O

Made in the USA.



3.5 oz/sqyd Mesh

This is the mesh that we use on our backpack's center pockets. It is relatively light weight for mesh, while being difficult to tear. It can withstand getting caught on branches and other typical abrasion that backpacks are subjected to. The hole size is a about 4 mm (a little over 1/8"). 


Weight:
 3.5 oz/sqyd (119 g/m²)



Customer Reviews

5.0 Based on 28 Reviews
5 ★
96% 
27
4 ★
4% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • ZPacks
  • materials
  • Quality
  • pack
  • water
  • shoulder
  • water bottle
  • bottle
  • sleeve
  • bottle sleeve
SW
01/07/2020
Stephen W.
United States United States

Love it!

Hated having my water bottle fall out of the side pockets as I was fumbling back there to reach them. This puppy is super well designed and seems to be bulletproof because of the quality of the materials. I bought one for everyone in the family and they all love them. Now my nephew wants one too!

TS
12/20/2019
Tim S.
United States United States

O2 sleeve for all.

Fits nicely on the shoulder strap and holds a litre bottle securely. No more fishing around for the bottle in the side pocket of you pack because it’s right there on your shoulder strap! What’s not to like?!

JE
12/11/2019
Jason E.
United States United States

Good Smart Water bottle holder

This is exactly as described & fits as website says it will. Nothing else though. Won’t hold Aquafina & definitely not a larger bottle. BUT, that’s exactly what they said you’d get. So....

RO
12/07/2019
Robert Ownby , Jr.
United States United States

convenient

keep my water easy to get to.

JB
12/05/2019
Jeff B.
United States United States

Very convenient

Great quality and easy to attach and detach. Saves you from the extra strain of reaching back for your water