This seam tape is made with adhesive stuck to thin Dyneema® Composite Fabric as the backing material. It has a brown paper layer that peels away leaving clear adhesive stuck to a Dyneema® Composite Fabric strip. Just peel off the paper and press it smooth. No heat required.

The adhesive sticks excellently to any of our Dyneema® Composite Fabric products such as shelters, stuff sacks, or dry bags. It also sticks excellently to the interior of our Hybrid DCF backpacks and our Ultra Fabric backpacks. It sticks OK to the polyurethane coating on the interior of our Robic backpacks. It will not stick to any silicone coated fabrics.

This tape is made from the same Ventum nylon material as our sleeping bags and wind shell jackets. It is perfect for making matching repairs to your nylon gear items.

Nylon frays around the edges, so cut a piece the size you need and gently singe the edges with a lighter before use. Peel the paper backing and stick it smooth. Your quick and easy repair will be a fairly permanent fix.

This small patch is designed for mending small holes in backpacks and other gear, or for adding reinforcements. Made from Dyneema® Composite Fabric with adhesive tape on the back. Peel off the brown paper back and stick it where you need it. The patch work best on the smooth interior of most backpacks.

The adhesive sticks excellently to any of our Dyneema® Composite Fabric products such as shelters, stuff sacks, or dry bags. It also sticks excellently to the interior of our Hybrid DCF backpacks and our Ultra Fabric backpacks. It sticks OK to the polyurethane coating on the interior of our Robic backpacks. It will not stick to any silicone coated fabrics.

This large patch is useful for bigger reinforcements and repairs. Cut it to size, peel off the brown paper backing, then stick it where you want it.

The adhesive sticks excellently to any of our Dyneema® Composite Fabric products such as shelters, stuff sacks, or dry bags. It also sticks excellently to the interior of our Hybrid DCF backpacks and our Ultra Fabric backpacks. It sticks OK to the polyurethane coating on the interior of our Robic backpacks. It will not stick to any silicone coated fabrics..

This patch is made from 1.6 oz/sqyd Dyneema® Composite material, with adhesive tape on the back. Peel off the brown paper backing and stick it where you want it. These are good for reinforcing wall tie outs on tarps, and for small patches on backpacks and other gear.

The adhesive sticks excellently to any of our Dyneema® Composite Fabric products such as shelters, stuff sacks, or dry bags. It also sticks excellently to the interior of our Hybrid DCF backpacks and our Ultra Fabric backpacks. It sticks OK to the polyurethane coating on the interior of our Robic backpacks. It will not stick to any silicone coated fabrics.

This patch is made from clear 1.6 oz/sqyd Dyneema® Composite Fabric material, with adhesive tape on the back. Peel off the brown paper backing and stick it where you want it.

We use these to reinforce the peaks of our tents, and they can also be cut into wedges for tie outs or repairs.

These stick excellent to Dyneema® Composite Fabric gear, but they will not stick to silicone fabrics. The adhesive will stick OK to normal nylon or polyester.

This Dyneema® Composite Fabric patch has a loop sewn to it and tape adhesive on the back. Peel off the brown paper back and stick it where you need it. You can use this to add light-duty attachment points to your gear, or add hang loops to your tarp.

If you need a stronger attachment for a tent tie out or a loop that will be under tension, reinforce the inside of your project with a 2.5” tape square and sew through the material.

These stick excellent to Dyneema® Composite Fabric gear, but they will not stick to silicone fabrics. The adhesive will stick OK to normal nylon or polyester.

This Dyneema® Composite Fabric patch has a molly loop sewn to it and tape adhesive on the back. Peel off the brown paper back and stick it where you need it. You can use this to add light-duty attachment points to your dry bags or other items and attach them to your pack or bike frame by threading webbing through them.

These stick excellent to Dyneema® Composite Fabric gear, but they will not stick to silicone fabrics. The adhesive will stick OK to normal nylon or polyester.

Make sure that your webbing straps are pulling against the bag (holding the molle loops tight to the bag) not away from it. Do not hang your item from the molle loops.

This stick on mitten hook allows you to add a convenient clip to your tent, backpack, pouches, etc. Peel off the brown paper back and stick it where you need it. You can also use these in tandem with a standard Stick on Loop to clip two pieces of gear together.

These stick excellent to Dyneema® Composite Fabric gear, but they will not stick to silicone fabrics. The adhesive will stick OK to normal nylon or polyester.

This Dyneema® Composite Fabric patch has a loop sewn to it and tape adhesive on the back. Peel off the brown paper back and stick it where you need it. You can use this to add light-duty attachment points to your gear, or add hang loops to your tarp.

These stick excellent to Dyneema® Composite Fabric gear, but they will not stick to silicone fabrics. The adhesive will stick OK to normal nylon or polyester.

Combine with our Stick on Metal Flat Hook to connect two items.

This stick on metal flat hook allows you to add a convenient clip to your tent, backpack, pouches, etc. Peel off the brown paper back and stick it where you need it. You can also use these in tandem with a standard Stick on Flat Loop to clip two pieces of gear together.

These stick excellent to Dyneema® Composite Fabric gear, but they will not stick to silicone fabrics. The adhesive will stick OK to normal nylon or polyester.

These toggles are great for closing tarp doors, clipping bug shelters to your tarp, and anywhere quick attachment/detachment is needed. Peel off the brown paper back and stick it where you need it. These are generally paired with Stick on Loops.

These stick excellent to Dyneema® Composite Fabric gear, but they will not stick to silicone fabrics. The adhesive will stick OK to normal nylon or polyester.

These stick on flat clips allow you to easily clip things to your tent, backpack, or other gear items. Clip a Pillow Dry Bag to your sleeping pad to keep it in place, or clip your sleeping pad to your tent floor to prevent it from sliding. This includes a male/female pair of stick-on patches.

These stick excellent to Dyneema® Composite Fabric gear, but they will not stick to silicone fabrics. The adhesive will stick OK to normal nylon or polyester.

If you want an example of how we use these clips. Check out our Key Pouch.