Our Airplane Travel Case is a useful addition for the jetsetting adventurer looking to blaze international trails. Slide your backpack inside to protect it when checking your backpack on to a plane. When you arrive, move the airplane case to the inside of your backpack and it doubles as a pack liner.
The Airplane Case adds protection when checking your backpack on to a plane. It has a sturdy webbing handle on the side for carrying your pack to the terminal. The handle is long so that you can keep your hand centered depending on height of the backpack.
The top of the case has a standard roll top opening, and it also has 2 small loops so that you can clip the top with a TSA approved lock, or with a carabiner for a little extra security.
This case also doubles as a pack liner! Just move it from the outside of your backpack to the inside once you reach your destination. It has the same construction as our standard pack liner (link), except it is made from thicker Dyneema Composite Fabric for extra durability. The seams are taped.
The dimensions are a little bit larger than our standard pack liner so that it will fit the exterior of our backpacks. You will likely need to remove any water bottles or gear from the exterior backpack pockets; move those items to the inside of the pack. It will fit all of our backpacks and other similarly sized packs.
Tip: Your backpack will slide into the case easier if you put it in upside down.
All Zpacks gear has a two year limited warranty against defects in materials or workmanship. Please see our return / warranty policy.
Made in the USA.
Flat Dimensions: 20.5" wide x 37.5" tall (52 cm x 96 cm)
1.43 oz/sqyd Dyneema Composite Fabric
Dyneema Composite Fabric is composed of high strength Dyneema fiber laminated inside a polyester membrane. It is inherently waterproof and does not require any coatings or DWR treatment. DCF has very high tensile strength for its weight and does not stretch. 1.43 oz/sqyd DCF has a thicker membrane and a higher Dyneema fiber count. This fabric weight has excellent abrasion and puncture resistance. We use this weight for products that need a little extra durability, like our Bear Bag Kit.
Tensile Strength: 210 lb/in (1840 N/5cm)
Puncture Strength: 5.2 lb (23 N)
Water Resistance: >20,000 mmH₂O
Made in the USA.
The airplane case worked like a charm.
"In January 2018 I bought a heap of gear from you. I have just returned from a trekking expedition in Mongolia. The airplane case worked like a charm. As well as 3 long-haul flights, it protected my pack on and off camels every day of a 10 day trek. One small tear – easily repaired."
Thumbs UP on another fine product.
"Just wanted to give some feedback on the airplane case I bought earlier this year. I first took it out to Norcal on the PCT. Then my wife and I went to the Dolomites in Italy. Then I took it out to Washington to finish sections K and L on the PCT. Each time I used it as a drybag after I landed. Going over it now at home I can see no wear, tears, or bruises on the bag despite the use it received this summer. Thumbs UP on another fine product."