Flipfuel Fuel Transfer Device
FlipFuel® allows you to transfer fuel from one canister to another. Consolidate partially empty canisters into one full one for longer trips, or portion off only the fuel you need into a smaller canister for shorter trips.
An efficient stove like the Soto Windmaster only uses about 1/4 ounce (7 grams) of fuel per 2-cup boil. There is no point of carrying significantly more fuel than you need for your trip!
Weigh your canisters when you first buy them and write the full-weight on the can. Then you can calculate the weight of the canister itself and know how much fuel is remaining.
Before transferring fuel, place the receiving canister in a freezer for several minutes to shrink the contents, and place the giving canister in the sun to expand the contents.
- FlipFuel® allows you to fully empty and recycle your partial canisters.
- Consolidate fuel into one canister for longer trips, or portion off just what you need for shorter trips.
- The fuel transfer device supports isobutane fuel canisters.
- Covered under FlipFuel's Replacement Guarantee.
- Imported.
Dimensions: 2.125" x 1.125" x .75" (5.4 x 2.5 x 1.9 cm)
STEP 1
Place receiving canister in the freezer, ice chest, or a cool shaded area. Place sending canister in the sun.
STEP 2
Wait 5 to 10 minutes. This allows the fuel canisters to create a temperature differential that facilitates the transfer.
STEP 3
Thread canisters onto FlipFuel® device. Sending canister on top ("OUT") side, receiving canister on bottom ("IN") side. Hand tighten.
STEP 4
Open valve to transfer fuel. Once fuel transfer is complete, close valve and detach isobutane fuel canisters.
