Flipfuel Fuel Transfer Device

$34.95 USD Weight 1.2 oz / 34.0 g
Lead Time Ships in 1-3 Days

FlipFuel® allows you to transfer fuel from one canister to another. Consolidate partially empty canisters into one full one for longer trips, or portion off only the fuel you need into a smaller canister for shorter trips.

An efficient stove like the Soto Windmaster only uses about 1/4 ounce (7 grams) of fuel per 2-cup boil. There is no point of carrying significantly more fuel than you need for your trip!

Weigh your canisters when you first buy them and write the full-weight on the can. Then you can calculate the weight of the canister itself and know how much fuel is remaining.

Before transferring fuel, place the receiving canister in a freezer for several minutes to shrink the contents, and place the giving canister in the sun to expand the contents.

  • FlipFuel® allows you to fully empty and recycle your partial canisters.
  • Consolidate fuel into one canister for longer trips, or portion off just what you need for shorter trips.

  • The fuel transfer device supports isobutane fuel canisters.

  • Covered under FlipFuel's Replacement Guarantee.

  • Imported.

Dimensions: 2.125" x 1.125" x .75" (5.4 x 2.5 x 1.9 cm)

STEP 1

Place receiving canister in the freezer, ice chest, or a cool shaded area. Place sending canister in the sun.

STEP 2

Wait 5 to 10 minutes. This allows the fuel canisters to create a temperature differential that facilitates the transfer.

STEP 3

Thread canisters onto FlipFuel® device. Sending canister on top ("OUT") side, receiving canister on bottom ("IN") side. Hand tighten.

STEP 4

Open valve to transfer fuel. Once fuel transfer is complete, close valve and detach isobutane fuel canisters.