Arc Scout 50L Backpack
Designed specifically for people with shorter torsos, the Arc Scout features our adjustable and patented 'Flexed Arc' frame which creates an air gap between your back and the pack, keeping you cool and providing a super comfortable fit. A smaller frame size creates a good fit for most hikers with a torso height shorter than 17" (43cm).
Designed to accommodate a wide variety of modular add-ons, the Arc Scout allows you to dial in your perfect set up and put you well on your way to that elusive sub-10 lb base weight.
- Constructed from 3.1 oz/sqyd Dyneema® Composite Fabric (Hybrid).
- Roll-top closure (like our dry bags) keeps water out, and lets you roll down the top as your gear load shrinks. All seams and attachment points are taped, making the pack highly water resistant. We still suggest using dry bags for your important items like your sleeping bag.
- Comfy 3/8" thick by 2.5" wide padded contoured shoulder straps and padded belt. Both the straps and the belt have a daisy chain for clipping on items, and an adjustable position sternum strap is also included. The belt and shoulder straps have 3D mesh on the underside. This gives them a little bit more cushion, and the belt also has more texture for better grip.
- Side pockets are sized to fit 1 or 1.5 liter bottles. They are positioned low on the pack and slanted forward for easy access without removing the pack. The pockets have drainage holes at the bottom, and elastic that keeps them tight at the top.
- Large stretchy mesh center pocket is great for quick access items. Mesh also lets you dry wet clothing and gives you a clear view of your gear.
- Side compression straps are made from non-stretchy Dyneema® cord for squishing down the pack volume. They also allow you to stand tall items like trekking poles in the side pockets.
- A top strap, and base straps allow you to lash on extra items to the top or base of the pack. The straps come off if you don't need them.
- A centrally located Hydration Port is included to string out a drinking tube over either the left or right shoulder. It is just above/between the shoulder straps and it has a triangular cover to keep out water. A water bladder can either be hung from an internal hang loop or laid horizontally on top of your gear.
- The 50L pack size has enough space for 5-6 days of food and ultralight gear. The pack can be compressed down with the roll-top and side compression straps for short trips or use the top strap and base straps to lash extra stuff to the outside for long carries.
- All standard Bear Canisters, including the Bearikade Expedition and the BearVault 500 will fit in the upper half of this pack standing on end. There is enough extra girth to either wrap a foam pad around the canister (if you use one) or stand a medium stuff sack vertically beside the bear canister.
- The short and medium size frames will fit into an airplane overhead bin with the top rolled down to the frame. The tall size frame may not fit unless you pop the vertical frame bars out of the pack.
- Our Flexed Arc Frame is is covered by US Patent No. 9,060,590
- Our torso height adjustment mechanism is is covered by US Patent No. 9,848,687
- All Zpacks gear has a two year limited warranty against defects in materials or workmanship. Please see our return / warranty policy.
- Made in the USA.
- Our ultralight Flexed Arc frame keeps the pack stiff so that most weight is carried on the hips instead of the shoulders. The frame pieces and mesh back panel can be easily removed or replaced.
- The frame is curved to allow air flow and keep your back cushioned from the pack's contents. You can adjust the curve by tensioning the mesh back panel. The recommended arch is about 2.5" (6 cm).
- The belt is attached directly to the bottom of the pack frame for the best load transfer.
- The belt is removable and interchangeable. If you lose weight or need to share the pack between people the belt can be swapped out. Watch the belt removal video for more information.
- The shoulder straps and load lifter straps are attached directly to the frame. Load lifters straps come standard on this pack.
- The shoulder straps can move up or down to adjust the torso height to a perfect fit using our patented torso adjustment mechanism. It works like a conveyor belt. This is great for sharing the pack between people, for growing teenagers, or for resale.
- The belt provides a full wrap around your back. No need for additional lumbar support.
- The belt is done with "V-Style" webbing so that the top and bottom circumference can be adjusted independently. This helps wrap your hips much more securely and prevents the belt from sliding down.
- Collectively, these features provide the additional load transfer necessary for loads up to around 35 lbs (16 kg).
Body dimensions: 7" x 12.5" x 26" (18 cm x 31.8 cm x 64 cm)
Volume: 50L (37L main body, 2.5L each side pocket, 8L center pocket)
Frame Height: 17.5" (44.5 cm)
.3.5 oz/sqyd Mesh
This is the mesh that we use on our backpack's center pockets. It has a relatively light weight for mesh, while being difficult to tear. It can withstand getting caught on branches and other typical abrasion that backpacks are subjected to. The hole size is a about 4 mm (a little over 1/8").
Weight: 3.5 oz/sqyd (119 g/m²)
5.3 oz/sqyd 3D Spacer Mesh
This mesh has a three-dimensional structure which allows airflow and adds cushioning. It has a tricot backing so you can't see clear through the holes. We use it on the underside of our backpack's shoulder straps and belts to absorb sweat, add cushion, and add grip. Our 3D mesh weighs less than most other types.
Weight: 5.3 oz/sqyd (180 g/m²)
Thickness: About 3/32" (2.5 mm)
To measure your torso height, you will need the help of a friend and a string or cloth tape measure.
Most hikers wear their belt near the top of their hips, however, it isn’t uncommon for hikers to position their belt higher or lower.
To ensure you lock in the perfect fit, we suggest putting a belt on over your clothes in the spot where you’d like to belt to ride. Start your measurement at the center of the belt where it meets your spine.
Lower your chin towards your chest. This will cause the C7 vertebrae to protrude at the base of your neck. The C7 vertebrae will mark the top of your torso height measurement.
Using the string or cloth tape measure, follow the curve of your spine up from the center of your belt to your C7 vertebrae. This measurement is your torso height.
To measure your belt size, pull a string or cloth tape measure tight around the spot you’d like your belt to ride. Choose a belt with a minimum adjustment of a couple inches smaller than your actual waist measurement. This will leave room for you to tighten down the belt if you lose a little weight on trail.
The belts on our Arc Series packs are also removable and interchangeable. This will give you the ability to switch the belt out if your waist size changes.
The belt on this pack is removable and interchangeable. It can be swapped out.
Best pack for petite women. I’m 4’11” with measurement of 14.5”. After trying on numerous paks this was the only one that fit. It is light too.
Scout - AT Section hike
Daughter absolutely loved her new pack. Held up great during a heavy rainstorm. Fit her better than any pack we have tried up to now. Should have bought it for her years ago.
Arc Scout perfection
Very satisfied with pack. It’s crazy light and exactly what we needed. Don’t change a thing!
Multi pack backpack not really a multi pack backpack
I found the 50L pack was too small for a 3 ngiht 3 day multi-day tramp. It is perfect for a day pack. Loved the lightness of the pack, as with the tent.
Very Happy Kiwi
Typically New Zealanders view ultralight gear with suspicion, which is arguably valid if doing heaps of bush bashing. I started using the Arc Blast a short while ago and bought the Scout for my wife (who is a bit of a reluctant hiker enjoying the type of hiking that involves lodge stays and three-course dinners). Big smiles and thrilled to save nearly 1.2Kg on her usual pack. The fit is great, the pack is straight-forward to use and the weight is amazing. And, we have no issues with durability, having recently walked Lake Waikaremoana (3 day walk), which for anyone who knows NZ tramping is less path than muddy, rooted, overgrown track. Very happy all round