Our Airplane Travel Case is a useful addition for the jetsetting adventurer looking to blaze international trails. Slide your backpack inside to protect it when checking your backpack on to a plane. When you arrive, move the airplane case to the inside of your backpack and it doubles as a pack liner.
The Airplane Case adds protection when checking your backpack on to a plane. It has a sturdy webbing handle on the side for carrying your pack to the terminal. The handle is long so that you can keep your hand centered depending on height of the backpack.
The top of the case has a standard roll top opening, and it also has 2 small loops so that you can clip the top with a TSA approved lock, or with a carabiner for a little extra security.
This case also doubles as a pack liner! Just move it from the outside of your backpack to the inside once you reach your destination. It has the same construction as our standard pack liner, except it is made from thicker Dyneema® Composite Fabric for extra durability. The seams are taped.
The dimensions are a little bit larger than our standard pack liner so that it will fit the exterior of our backpacks. You will likely need to remove any water bottles or gear from the exterior backpack pockets; move those items to the inside of the pack. It will fit all of our backpacks and other similarly sized packs.
Tip: Your backpack will slide into the case easier if you put it in upside down.
All Zpacks gear has a two year limited warranty against defects in materials or workmanship. Please see our return / warranty policy.
Made in the USA.
Flat Dimensions: 22" wide x 38.5" tall (56 cm x 98 cm)
Volume: Generally fits backpacks up to 65 Liters with items removed from the exterior pockets.
1.6 oz/sqyd Dyneema® Composite Fabric
Dyneema® Composite Fabric is composed of high strength Dyneema® fiber laminated inside a polyester membrane. It is inherently waterproof and does not require any coatings or DWR treatment. Dyneema® Composite Fabric has very high tensile strength for its weight and does not stretch. 1.6 oz/sqyd DCF has a thicker membrane and a higher Dyneema® fiber count. This fabric weight has excellent abrasion and puncture resistance. We use this weight for products that need a little extra durability, like our Bear Bag Kit.
Tensile Strength: 210 lb/in (1840 N/5cm)
Puncture Strength: 5.2 lb (23 N)
Water Resistance: >20,000 mmH₂O
Made in the USA.
Just used on a trip to Columbia. It was a pleasure, I was able to load up my backpack and at the end of my packing to add additional items into the bag. The bag was STRONG, easy to spot on the airport baggage car carousel. As a matter of fact, the luggage handlers were extra careful with my bag and put it into a special basket. Only issue was that everyone picked up the bag by the closure side instead of the handle.
Worked great thanks!
I just trying to fit my 29lb Osprey Exos 58 into Zpack Airplane case and even after I removed the items from both side pockets and front mesh placket it doesn’t fit! I’m leaving early am for a backpacking trip and I ended up using a compactor garbage bag. I’m SO disappointed and mad.
I love the many products I have purchased from your company. I was disappointed with the airplane case. It was too narrow and I was not able to fit my x-sm Zpac into it. I had purchased it for a recent trip that I had to fly. I ended up having to use something else. I would like to have something like this in the future that had more room to fit my pack in.
My pack was torn-up a couple years ago on a flight. This is a great way to protect my pack and to use it as bag liner. Nothing is available that is this good...